ULTRASONIC SENSOR(for Rear) REMOVAL

PROCEDURE

1. REMOVE NO. 1 FLOOR UNDER COVER

   Click here

2. REMOVE REAR BUMPER COVER

   Click here

3. REMOVE NO. 4 FLOOR WIRE

   1. Remove the 3 pieces of tape.

   2. Disconnect the 4 connectors.

   3. Detach the 2 clamps and remove the No. 4 floor wire.

      

      Table 1. Text in Illustration

      *1

      Tape

      -

      -

4. REMOVE NO. 1 ULTRASONIC SENSOR

   

   Tip:

   Use the same procedure for all No. 1 ultrasonic sensors.

   1. Detach the 2 claws and remove the No. 1 ultrasonic sensor.

5. REMOVE ULTRASONIC SENSOR CLIP

   Tip:

   Use the same procedure for both ultrasonic sensor clips.

   1. 

      Using a screwdriver, detach the claw and remove the ultrasonic sensor clip as shown in the illustration.

      Tip:

      Tape the screwdriver tip before use.

      Table 2. Text in Illustration

      *a	Protective Tape

6. REMOVE ULTRASONIC SENSOR RETAINER

   

   Tip:

   Use the same procedure for both ultrasonic sensor retainers.

   1. Detach the 4 claws and remove the ultrasonic sensor retainer.