FRONT SPEED SENSOR REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY RH (RH POSITION)


    1. B007T2L

      Move the front seat assembly fully forward.

    2. Remove the 2 bolts on the rear side of the seat.

    3. Move the front seat assembly to the rearmost position.

    4. Remove the 2 bolts on the front side of the seat.

    5. Move the front seat assembly to the center of the seat slide rail. Set the seatback in the upright position.

    6. Disconnect the front seat inner belt assembly connector.

    7. Remove the front seat assembly.

  2. REMOVE FRONT DOOR SCUFF PLATE RH (RH POSITION)

  3. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY (RH POSITION)


    1. Roll up the carpet and remove the engine service hole sub cover.

  4. REMOVE FRONT WHEEL

  5. REMOVE SPEED SENSOR FRONT


    1. B007QVW

      LH side:


      1. Disengage the 2 wire harness clamps for body.

      2. Disconnect the connector.

    2. B007VRU

      RH side:


      1. Disengage the clamp from the bracket.

      2. Disconnect the connector.

      3. Remove the bolt and the bracket from the body.

    3. B007ST9

      Remove the bolt, and separate the bracket from the upper arm.

    4. B007QAP

      Remove the 2 bolts and the front speed sensor from the steering knuckle.