BODY STRUCTURE


  1. CONSTRUCTION


    1. Under Body


      1. To create a smooth rearward airflow for the air which enters from the front to under floor, the following parts with airflow adjustment effects are located on the lower surface of the vehicle. Smooth airflow in the lower surface of the vehicle enhances the speed of airflow and a low pressure region is created between the vehicle and the road surface (Venturi effect). This low pressure region attracts the vehicle to the road surface, thus causing down force. Thus, superior straight-line stability has been achieved.


        • A flat airflow adjustment surface is provided for the engine under cover. Also, an aero stabilizing fin is provided.

        • The surface area of the front floor cover has been increased, and the height from the ground has also been optimized. In addition, an aero stabilizing fin is provided.

        A01R8KFC02
        *1 Engine Under Cover No. 1 *2 Front Wheel Opening Extension LH
        *3 Front Wheel Opening Extension RH *4 Front Fender Sprashshield FR LH
        *5 Front Fender Sprashshield FR RH *6 Engine Under Cover No. 2
        *7 Front Floor Cover LH *8 Front Floor Cover RH
        *9 Rear Wheelhouse Plate FR LH *10 Rear Wheelhouse Plate FR RH
        *11 Suspension Arm Cover LH *12 Suspension Arm Cover RH
        *a Aero Stabilizing Fin - -