REAR LOWER ARM REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • The procedure listed below is for the LH side.

  • Use the same procedure for the RH and LH sides.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE NO. 1 PARKING BRAKE CABLE SUPPORT BRACKET


    1. A004HMG

      Remove the bolt and No.1 parking brake cable support bracket.

  3. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY LH


    1. A004H1Y

      Remove the 2 bolts, 2 nuts and the rear No. 1 suspension arm assembly LH.

  4. SEPARATE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (w/ HID Headlight System)

    Click here

  5. SEPARATE STABILIZER LINK SUB-ASSEMBLY (for LH Side)

    Click here

  6. SEPARATE REAR SHOCK ABSORBER WITH COIL SPRING


    1. A004IW1

      Remove the bolt, nut and separate the rear shock absorber with coil spring from the rear No. 2 suspension arm assembly.

  7. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH


    1. A004JI3

      Remove the nut and bolt on the axle carrier side, and then separate the rear No. 2 suspension arm assembly LH.

    2. A004K9Z

      Remove the bolt and nut on the rear suspension member side, and then remove the rear No. 2 suspension arm assembly LH.