SFI SYSTEM PRECAUTION

  1. INITIALIZATION

    Note:

    • If the ECM is replaced, register the ECU communication ID for Engine Immobiliser System (w/o entry and start system) (Refer to the Service Bulletin for Registration).

    • When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

      System Name

      See Procedure

      Stop and Start System

      Click here

      Simple Intelligent Parking Assist System

      Power Door Lock Control System

  2. WHEN USING GTS

    CAUTION:

    Observe the following items for safety reasons:

    • Before using the GTS, read the instruction manual.

    • Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.

    • When driving the vehicle for testing purposes using the GTS, 2 persons are required. One is for driving the vehicle, and the other operates the GTS.

  3. IGNITION SWITCH EXPRESSIONS

    Tip:

    The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression

    Ignition Switch (Position)

    Engine Switch (Condition)

    Ignition Switch off

    LOCK

    Off (Lock)

    Ignition Switch ACC

    ACC

    On (ACC)

    Ignition Switch ON

    ON

    On (IG)

    Engine Start

    START

    On (Start)