2AD-FTV COOLING SERVICE DATA
Capacity |
Classification |
|---|---|
w/o Combustion Type Power Heater: 7.3 liters (7.7 US qts, 6.4 Imp. qts) w/ Combustion Type Power Heater: 7.7 liters (8.1 US qts, 6.8 Imp. qts) |
Use only "TOYOTA Super Long Life Coolant", or similar high qualityethylene glycol based non-silicate, non-amine, non-nitrite, and nonboratecoolant with long-life hybrid organic acid technology (coolantwith long-life hybrid organic acid technology is a combination of lowphosphates and organic acids). |
Thermostat |
Valve opening temperature |
80 to 84°C (176 to 183°F) |
Standard valve lift |
10 to 14mm (0.394 to 0.551 in.) or more at 95°C (203°F) |
Item |
Tester Connection |
Condition |
Specified Condition |
|---|---|---|---|
Cooling fan motor |
A52 - 2 |
Standard Current Battery voltage applied at 20°C (68°F) |
10.6 to 16.6 A |
No. 2 cooling fan motor (for Manual Transaxle) |
A51 - 1 |
Standard Current Battery voltage applied at 20°C (68°F) |
7.8 to 11.8 A |
No. 2 cooling fan motor (for Automatic Transaxle) |
A51 - 1 |
Standard Current Battery voltage applied at 20°C (68°F) |
10.6 to 16.6 A |
Reservoir cap |
Standard Judgment Criterion |
Standard value (for brand-new cap) |
93 to 123 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi) |
Minimum standard value (for used cap) |
79 kPa (0.8 kgf/cm2, 11.4 psi) |
Item |
Tester Connection |
Condition |
Specified Condition |
|---|---|---|---|
No. 1 cooling fan relay |
3 - 5 |
Battery voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
3 - 5 |
Battery voltage applied between terminals 1 and 2 |
Below 1Ω |
|
No. 2 cooling fan relay |
3 - 4 |
Battery voltage not applied between terminals 1 and 2 |
Below 1Ω |
3 - 4 |
Battery voltage applied between terminals 1 and 2 |
10 kΩ or higher |
|
3 - 5 |
Battery voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
|
3 - 5 |
Battery voltage applied between terminals 1 and 2 |
Below 1Ω |
|
No. 3 cooling fan relay |
3 - 5 |
Battery voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
3 - 5 |
Battery voltage applied between terminals 1 and 2 |
Below 1Ω |