POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    1. Customizing with the intelligent tester

      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Utility / Customize / Door Lock.

      5. Select the setting by referring to the table below.

        Door Lock

        Tester Display

        Description

        Default

        Setting

        ECU

        Unlock Key Twice

        Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Auto Lock

        Function that locks all doors when the vehicle speed reaches a certain level.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Auto Lock/Shift

        Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed.

        OFF

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Auto Unlock/Shift

        Function that unlocks all doors when the shift lever is moved to P from any position other than P while the engine switch is on (IG).

        OFF

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        All Unlock/Open-Close

        Function that unlocks the other doors when the driver door is opened within 43 seconds after the engine switch is turned off.

        ON*1

        OFF*2

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        • *1: for European Models

        • *2: except European Models

    2. Customizing with Multi-information display

      1. Turn the engine switch on (IG).

      2. With the vehicle stationary or at a vehicle speed of less than 8 km/h (4.9 mph), press and hold the menu switch on the steering pad switch to display the meter customize mode screen.

      3. Select the setting by referring to the table below.

        Display

        Default

        Content

        Setting

        Relevant ECU

        Auto Lock at Speed

        ON

        Function that locks all doors when the vehicle speed reaches a certain level.

        ON or OFF

        Main body ECU (Multiplex network body ECU)

        Auto Lock at Sift

        OFF

        Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed.

        ON or OFF

        Main body ECU (Multiplex network body ECU)

        Unlock at Park

        OFF

        Function that unlocks all doors when the shift lever is moved to P from any position other than P while the engine switch is on (IG).

        ON or OFF

        Main body ECU (Multiplex network body ECU)

        Unlock All at Driver Door Open

        ON*1

        OFF*2

        Function that unlocks the other doors when the driver door is opened within 43 seconds after the engine switch is turned off.

        ON or OFF

        Main body ECU (Multiplex network body ECU)

        • *1: for European Models

        • *2: except European Models