ENTRY AND START SYSTEM


  1. CONSTRUCTION


    1. Combination Meter Assembly (Models with Analog Type Combination Meter Assembly)

      A01QF8WC01
      *1 Entry Warning Indicator - -

      1. The current power condition can be confirmed through the illumination or blinking and emission color of the entry warning indicator provided on the combination meter assembly.

      2. When the certification ECU detects an abnormality of the entry and start system, the entry warning indicator blinks in yellow to inform the driver.

        Power Source Condition Entry Warning Indicator
        Brake pedal not depressed Brake pedal depressed with shift lever in P or N
        Off Off On (Green)
        On (ACC), On (IG) Blinks slowly (Green) On (Green)
        Engine Running Off Off
        Steering Wheel Lock not Unlocked Blinks (Green) for 15 seconds Blinks (Green) for 15 seconds
        Entry and Start System Malfunction Blinks (Yellow) for 15 seconds Blinks (Yellow) for 15 seconds

    2. Combination Meter Assembly (Models with Optitron Type Combination Meter Assembly)


      1. When the certification ECU (smart key ECU assembly) detects an abnormality with the smart key system, a message appears on the multi-information display. If the engine is stopped in this state, it might not be possible to restart it.

        A01QF6ZC01
        *1 Multi-information Display - -
        *a Power Source Display *b Power Source State
        *c Key Warning Light - -
        Power Source Display
        Displayed Item Power Source Condition
        -

        Either of the following conditions is met:


        • The engine has started.

        • The power source is turned off.
        POWER ON

        • On (ACC) state

        • On (IG) state
        Key Warning Light Engine start ready state*

        Tech Tips

        *: The shift lever is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).