VACUUM PUMP (for 5L-E) DISASSEMBLY


  1. REMOVE VACUUM PUMP PULLEY


    1. A01DZ1T

      Using soft jaws, place the vacuum pump in a vise, and remove the pulley lock nut and pulley.

  2. REMOVE VACUUM PUMP VACUUM HOSE UNION


    1. A01E1XEE01

      Using SST, hold the check valve assembly, and remove the union bolt, vacuum hose union and 2 gaskets.

      SST
      09922-10010

  3. REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY


    1. A01DV3W

      Remove the check valve assembly and gasket.

  4. REMOVE VACUUM PUMP END COVER


    1. A01DVO0

      Remove the 4 screws and end cover.

  5. REMOVE VACUUM PUMP SHAFT


    1. A01DY6B

      Using a plastic-faced hammer, tap out the vacuum pump shaft with bearing.

  6. REMOVE STOP RING


    1. Remove the stop ring from the vacuum pump shaft.

  7. REMOVE VACUUM PUMP BEARING


    1. A01DZMQ

      Using a press, press out the bearing from the rotor shaft.

  8. REMOVE VACUUM PUMP BLADE


    1. A01DY2M

      Remove the 2 screws and end plate.

    2. Remove the rotor and 5 pump blades.

  9. REMOVE O-RING


    1. Remove the O-ring from the case.

  10. REMOVE OIL SEAL


    1. A01DXQA

      Using a screwdriver, remove the oil seal.