DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE

  1. REMOVE TRANSFER ASSEMBLY

    Click hereClick here

  2. REMOVE MANIFOLD STAY

    1. for 3ZR-FE:

      Click here

    2. for 3ZR-FAE:

      Click hereClick here

  3. REMOVE DRIVE SHAFT BEARING BRACKET

    1. for 3ZR-FE:

      Click hereClick hereClick here

    2. for 3ZR-FAE:

      Click hereClick hereClick hereClick hereClick hereClick here

  4. REMOVE TRANSAXLE CASE OIL SEAL

    1. C277915C01

      *a

      Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, pry out the front transaxle case oil seal.

      Tip:

      Tape the screwdriver tip before use.

  5. REMOVE FRONT DIFFERENTIAL CASE OIL SEAL

    1. C277916E01

      Using SST, remove the front differential case oil seal.

      09308-00010

      Note:

      Be careful not to damage the differential case.

  6. INSTALL FRONT DIFFERENTIAL CASE OIL SEAL

    1. Coat the lip of a new front differential case oil seal with MP grease.

    2. C277921C01

      *a

      21.5 to 22.5 mm (0.847 to 0.885 in.)

      Using SST and a hammer, tap in a new front differential case oil seal to the front transaxle case.

      09950-70010

      09951-07200

      09950-60010

      09951-00410

      Standard Depth

      21.5 to 22.5 mm (0.847 to 0.885 in.)

      Note:

      Do not damage the front differential case oil seal lip.

  7. INSTALL TRANSAXLE CASE OIL SEAL

    1. Coat the lip of a new transaxle case oil seal with MP grease.

    2. C277918C01

      *a

      5.5 to 6.5 mm (0.217 to 0.255 in.)

      Using SST and a hammer, tap in a new transaxle case oil seal to the front transaxle case.

      09649-17010

      09950-70010

      09951-07100

      Standard depth

      5.5 to 6.5 mm (0.217 to 0.255 in.)

      Note:

      Do not damage the transaxle case oil seal lip.

  8. INSTALL DRIVE SHAFT BEARING BRACKET

    1. for 3ZR-FE:

      Click hereClick here

    2. for 3ZR-FAE:

      Click hereClick hereClick hereClick hereClick here

  9. INSTALL MANIFOLD STAY

    1. for 3ZR-FE:

      Click here

    2. for 3ZR-FAE:

      Click hereClick here

  10. INSTALL TRANSFER ASSEMBLY

    Click hereClick here