OCCUPANT DETECTION SENSOR(for Sedan) INSTALLATION

PROCEDURE

1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)

   1. Temporarily install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover.

   2. 

      Using hog ring pliers, install 17 new hog rings.

      Note:

      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

   3. 

      Using hog ring pliers, install 2 new hog rings.

      Note:

      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

   Tip:

   Use the same procedure as for the driver seat.

   Click here

3. INSTALL FRONT SEAT INNER CUSHION SHIELD

   Click here

4. INSTALL FRONT SEAT CUSHION SHIELD

   Click here

5. INSTALL RECLINING ADJUSTER RELEASE HANDLE

   Tip:

   Use the same procedure as for the driver seat.

   Click here

6. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

   Tip:

   Use the same procedure as for the driver seat.

   Click here

7. INSTALL FRONT SEAT INNER BELT ASSEMBLY

   Click here

8. INSTALL FRONT SEAT ASSEMBLY

   Tip:

   Use the same procedure as for the driver seat.

   Click here