NAME PLATE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When removing the name plates or side panel emblem, heat the back door panel and name plates or side panel emblem using a heat light.

Heating Temperature
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
Name Plate or Back Door Emblem 20 to 30°C (68 to 86°F)

CAUTION:


  • Do not touch the heat light and heated parts, touching the heat light may result in burns.

  • Touching heated parts for a long time may result in burns.

Note

Do not heat the back door panel, back door name plates or side panel emblem excessively.

PROCEDURE


  1. REMOVE NO. 1 BACK DOOR EMBLEM


    1. Remove the back door outside garnish sub-assembly.

      Click here

    2. B005ZRO

      Disengage the 3 claws and pin to remove the No. 1 back door emblem.

      Note

      Be careful not to damage the back door outside garnish sub-assembly.

  2. REMOVE NO. 2 BACK DOOR NAME PLATE


    1. Apply protective tape around the No. 2 back door name plate as shown in the illustration.

    2. B005Z1AC01
      B005XMV Protective Tape

      Using a moulding remover, separate the double-sided tape and remove the No. 2 back door name plate.

      Note

      Be careful not to damage the back door panel.

  3. REMOVE NO. 1 BACK DOOR NAME PLATE


    1. B005Y0AC01
      B005XMV Protective Tape

      Apply protective tape around the No. 1 back door name plate as shown in the illustration.

    2. Using a moulding remover, separate the double-sided tape and remove the No. 1 back door name plate.

      Note

      Be careful not to damage the back door panel.

  4. REMOVE SIDE PANEL EMBLEM

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B005ZKUC01
      B005XMV Protective Tape

      Apply protective tape around the side panel emblem as shown in the illustration.

    2. Using a moulding remover, separate the double-sided tape and disengage the 2 pins to remove the side panel emblem.

      Note

      Be careful not to damage the side panel.