PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:C1614
| DTC Code | DTC Name |
|---|---|
| C1614 | ECU Malfunction |
DESCRIPTION
This DTC is stored if the parking assist ECU judges that there is an internal malfunction as a result of its self check.
The parking assist ECU stores different types of information during initialization. If the parking assist ECU cannot read the stored information when activated, the parking assist ECU judges that there is an internal malfunction and stores this DTC.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
C1614 |
ECU Malfunction |
|
Parking assist ECU |
CAUTION / NOTICE / HINT
When "!" mark is displayed on the multi-display after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.
PROCEDURE
READ VALUE USING GTS (PARKING ASSIST ECU STATUS)
Use the Data List to check if the parking assist ECU status is functioning properly.
Chassis > Panoramic View Monitor > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
Main CPU Forced Termination Detection Record
A history item indicating that the main CPU did not enter standby status within 15 seconds of turning the power switch off and a forced end was applied
Unrec/Rec
Unrec: Parking assist ECU is normal
Rec: Parking assist ECU is abnormal
-
Main CPU Abnormal Response Record
A history item indicating that the main CPU became unresponsive in normal status
Unrec/Rec
Unrec: Parking assist ECU is normal
Rec: Parking assist ECU is abnormal
-
Main CPU Abnormal Reset Record
A history item indicating that the main CPU was reset, although the power switch was not turned off in normal status
Unrec/Rec
Unrec: Parking assist ECU is normal
Rec: Parking assist ECU is abnormal
-
Image Processing IC Written Protect Record
A history item indicating that the image processing IC memory was write protected
Unrec/Rec
Unrec: Parking assist ECU is normal
Rec: Parking assist ECU is abnormal
-
Image Processing IC Initialized Malfunction Record
A history item indicating that the image processing IC memory was not initialized
Unrec/Rec
Unrec: Parking assist ECU is normal
Rec: Parking assist ECU is abnormal
-
Main EEPROM Access Status
Main EEPROM access status
OK/NG
OK: Parking assist ECU is normal
NG: Parking assist ECU is abnormal
-
Sub EEPROM Access Status
Sub-EEPROM access status
OK/NG
OK: Parking assist ECU is normal
NG Parking assist ECU is abnormal
-
System Power Supply Voltage Malfunction Record
A history item indicating an abnormal generated-voltage value from the system power source
Unrec/Rec
Unrec: Parking assist ECU is normal
Rec: Parking assist ECU is abnormal
-
Main CPU Starting Malfunction Record
A history item indicating that the main CPU did not start
Unrec/Rec
Unrec: Parking assist ECU is normal
Rec: Parking assist ECU is abnormal
-
CAN CPU Boot Malfunction Record
A history item indicating that the CPU controlling the input and output of the information obtained via the CAN communication system did not start and the information could not be retrieved
Unrec/Rec
Unrec: Parking assist ECU is normal
Rec: Parking assist ECU is abnormal
-
Chassis > Panoramic View Monitor > Data List
Tester Display
Main CPU Forced Termination Detection Record
Main CPU Abnormal Response Record
Main CPU Abnormal Reset Record
Image Processing IC Written Protect Record
Image Processing IC Initialized Malfunction Record
Main EEPROM Access Status
Sub EEPROM Access Status
System Power Supply Voltage Malfunction Record
Main CPU Starting Malfunction Record
CAN CPU Boot Malfunction Record
Result
Result
Proceed to
OK is displayed for all items
A
NG is displayed
B
CHECK FOR DTC
Clear the DTCs.
Chassis > Panoramic View Monitor > Clear DTCs
Check for DTCs.
Chassis > Panoramic View Monitor > Trouble Codes
OK
DTC C1614 is not output.
Result
Proceed to
OK
NG
Tip:If DTC C1614 is output, perform the procedure to allow the parking assist ECU to store the vehicle information again.
If DTC C1614 is still output after performing the procedure to make the parking assist ECU store the vehicle information 3 times, replace the parking assist ECU.
If DTC C1614 is output frequently, replace the parking assist ECU even though the DTC is not output when rechecking for DTCs.
OK END