AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) CUSTOMIZE PARAMETERS

PROCEDURE

  1. CUSTOMIZE AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    1. Customizing with intelligent tester

      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Air Conditioner / Utility / Customize.

      5. Select the setting by referring to the table below.

        Display

        Default

        Contents

        Setting

        Relevant ECU

        Set Temperature Shift

        Normal

        Function to set the temperature shift.

        +2 C/+1 C/Normal/-1 C/-2 C

        Air conditioning amplifier assembly

        Evaporator Control

        Automatic

        Function to set the evaporator control to the automatic position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up.

        Automatic/Manual

        Air conditioning amplifier assembly

        Air Inlet Mode

        Automatic

        Function to automatically change to recirculation mode when the A/C is turned on.

        Automatic/Manual

        Air conditioning amplifier assembly

        Foot/DEF Auto Mode

        ON

        Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on.

        ON/OFF

        Air conditioning amplifier assembly

        Foot/DEF Automatic Blow Up Function

        ON

        Function to change the blower level automatically when the front defroster is on.

        ON/OFF

        Air conditioning amplifier assembly

        Refrigerant Shortage Check

        ON

        Function to cancel the refrigerant gas volume check (check performed during normal operation) when item is set to OFF

        ON/OFF

        Air conditioning amplifier assembly

        Blower Operation Setting (Stop&Start)*

        Blower OFF

        Function that sets the blower level to "1" while the Stop and Start System is controlling the idling stop.

        Blower OFF/Blower Level 1

        Air conditioning amplifier assembly

        Outside Air Mode Auto Switch Function

        ON

        Function to automatically change the air inlet to FRESH mode when the vehicle is parked.

        ON/OFF

        Air conditioning amplifier assembly

        • *: w/ Stop and Start System