| VL01 Voltage |
This parameter indicates the voltage value of VL01 |
0 to 37.203 V |
| VL02 Voltage |
This parameter indicates the voltage value of VL02 |
0 to 18.906 V |
| VL03 Voltage |
This parameter indicates the voltage value of VL03 |
-3.486 to 7.093 V |
| CNT V1 Voltage |
This parameter indicates the voltage value of CNT V1 |
0 to 37.203 V |
| CNT V2 Voltage |
This parameter indicates the voltage value of CNT V2 |
0 to 37.203 V |
| Sub Battery Module Charge Control Current |
Sub-battery module charge control current |
0 to 240.88 A |
| Sub Battery Module Discharge Control Current |
Sub-battery module discharge control current |
0 to 240.88 A |
| Protection Relay FET Temperature1 |
This parameter indicates the temperature of the protection relay FET1. |
-50 to 120°C (-58 to 248°F) |
| Protection Relay FET Temperature2 |
This parameter indicates the temperature of the protection relay FET2. |
-50 to 120°C (-58 to 248°F) |
| Sub Battery Module Temperature |
This parameter indicates the temperature of the sub battery. |
-50 to 120°C (-58 to 248°F) |
| Auxiliary Battery Voltage |
Sub-battery module assembly B (+B) terminal voltage |
0 to 65.535 V |
| Protection Relay Circuit Voltage |
This parameter indicates the voltage of protection relay circuit. |
0 to 81.081 V |
| Sub Battery Module State of Charge |
This parameter indicates the capacity of the sub-battery |
0 to 100% |
| Sub Battery Module State of Health |
This parameter indicates the battery deterioration rate of the sub-battery module. |
0 to 100% |
| Sub Battery Module Internal Resistance |
This parameter indicates the internal resistance value of the sub-battery. |
0 to 1.27 Ohm |
| BRin Duty |
This parameter indicates BRin input duty value. |
0 to 100% |
| BURDIAG1 Duty |
This parameter indicates BURDIAG1 input duty value. |
0 to 100% |
| BURDIAG2 Duty |
This parameter indicates BURDIAG2 input duty value. |
0 to 100% |
| ROout Duty |
This parameter indicates ROout output duty value. |
0 to 100% |
| BUR Duty |
This parameter indicates BUR output duty value. |
0 to 100% |
| Ignition Switch Status |
This parameter indicates the status of the engine switch |
ON/OFF |
| Hybrid Powertrain Control Module |
This parameter indicates the availability of Hybrid system. |
Without/With |
| Stop and Start Control Module |
This parameter indicates the availability of Stop and Start. |
Without/With |
| Power Switch Status |
This parameter indicates the status of the power switch. |
ON/OFF |
| Engine Status |
This parameter indicates the status of the engine. |
ON/OFF |
| Charging Control Mode |
Charging control mode |
SOC Keep / Auxiliary Charge / Refresh Charge / Normal / High/Low Temperature / Abnormal / SOC Calculate / Normal |
| Voltage Change Status |
This parameter indicates the status of the voltage change. |
ON/OFF |
| Backup Relay Status |
This parameter indicates the status of the backup relay. |
ON/OFF |
| Protection Relay Status |
This parameter indicates the status of the protection relay. |
ON/OFF |
| Vehicle Speed |
This parameter indicates the speed of the vehicle. |
0 to 65535 km/h (0 to 40722 mph) |
| DTC Sub Code |
This parameter indicates DTC sub code. |
0 to 255 |