CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL CAMSHAFT POSITION SENSOR

    1. A295685C01

      *1

      O-ring

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note:

      If reusing the camshaft position sensor, be sure to inspect the O-ring.

    2. Install the camshaft position sensor to the timing chain cover assembly with the bolt.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

      Note:

      • If the camshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

    3. Connect the camshaft position sensor connector.

  2. INSPECT FOR OIL LEAK

    Click here

  3. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here