CRANKSHAFT POSITION SENSOR INSPECTION

PROCEDURE

  1. INSPECT CRANK POSITION SENSOR

    1. A210395C01

      *a

      Component without harness connected

      (Crank Position Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (NE+) - 2 (NE-)

      Cold

      1630 to 2740 Ω

      Hot

      2065 to 3225 Ω
      Note:

      In the table above, the terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the resistance is not as specified, replace the crank position sensor.