SFI SYSTEM(w/o EGR System), Diagnostic DTC:P060B

DTC Code DTC Name
P060B Internal Control Module A/D Processing Performance

DESCRIPTION

This DTC is stored when a communication error occurs in the ECM.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Warning Indicate

Memory

P060B

Internal Control Module A/D Processing Performance

There is an ECM main CPU communication error (1 trip detection logic).

  • ECM

  • Knock sensor

Comes on

DTC stored

CONFIRMATION DRIVING PATTERN

  1. Turn the engine switch off.

  2. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

  3. Connect the cable to the negative (-) battery terminal.

  4. Turn the engine switch on (IG) and wait for 16 seconds or more.

PROCEDURE

  1. CHECK FOR DTC

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Clear DTCs.

      Click here

      Powertrain > Engine and ECT > Clear DTCs

    5. Turn the tester off.

    6. Turn the engine switch off.

    7. Disconnect the intelligent tester.

    8. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

    9. Connect the cable to the negative (-) battery terminal.

    10. Connect the intelligent tester to the DLC3.

    11. Turn the engine switch on (IG) and turn the tester on.

    12. Wait 16 seconds or more.

    13. Enter the following menus: Powertrain / Engine and ECT / DTC.

    14. Check for DTCs.

      Powertrain > Engine and ECT > Trouble Codes

      Result

      Result

      Proceed to

      DTC is not output

      A

      DTC P060B is output

      B

      DTC P060B and P0327, P0328, P032C, P032D, P0332, P0333, P033C or P033D are output

      C
    A

    CHECK FOR INTERMITTENT PROBLEMS

    Click here

    B

    REPLACE ECM

    Click here

    C

    GO TO DTC P0327, P0328, P032C, P032D, P0332, P0333, P033C OR P033D

    Click here