LIGHTING SYSTEM PROBLEM SYMPTOMS TABLE
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Symptom |
Suspected Area |
Link |
|---|---|---|
Map light does not illuminate (Map light switch ON position) |
Bulb |
- |
Map light assembly |
||
Harness or connector |
- |
|
Combination meter assembly |
||
Map light does not illuminate (Map light switch DOOR position) |
Bulb |
- |
Map light assembly |
||
Door courtesy switch circuit |
||
Driver side junction block assembly |
||
Harness or connector |
- |
|
Combination meter assembly |
Symptom |
Suspected Area |
Link |
|---|---|---|
Luggage compartment light does not illuminate |
Bulb |
- |
No. 1 luggage compartment light assembly |
||
Harness or connector |
- |
|
Combination meter assembly |
Symptom |
Suspected Area |
Link |
|---|---|---|
Engine switch illumination does not illuminate |
Engine switch illumination circuit |
|
Certification ECU (Smart key ECU assembly) |
- |
Symptom |
Suspected Area |
Link |
|---|---|---|
All the interior lights that receive power via the DOME CUT relay do not illuminate |
DOME fuse |
- |
DOME CUT Relay |
||
Holder connector |
- |
|
Harness or connector |
- |
|
Combination meter assembly |
Symptom |
Suspected Area |
Link |
|---|---|---|
Battery saving control does not operate |
ECU-ACC fuse |
- |
METER fuse*1 |
- |
|
DOME fuse |
- |
|
DOME CUT relay |
||
Stop and start system*2 |
||
Door courtesy switch circuit |
||
Driver side junction block assembly |
||
Holder connector |
- |
|
Harness or connector |
- |
|
Combination meter assembly |
*1: w/o Stop and Start System
*2: w/ Stop and Start System