| DTC Code | DTC Name |
|---|---|
| P1578 | Brake System Malfunction |
DESCRIPTION
This DTC is stored when the brake control system has a problem. Check the brake control system when this DTC is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P1578 | Brake System Malfunction | There is a brake control system malfunction |
|
*1: w/ Vehicle Stability Control System
*2: w/o Vehicle Stability Control System
CAUTION / NOTICE / HINT
Note
This DTC may be output by the brake control system at the same time. In that case, perform troubleshooting for the brake control system first.
PROCEDURE
CHECK FOR DTCs (BRAKE CONTROL SYSTEM)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.
Check for DTCs.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| B |
|
GO TO VEHICLE STABILITY CONTROL SYSTEM (DTC CHART) Click here |
| C |
|
GO TO ANTI-LOCK BRAKE SYSTEM (DTC CHART) Click here |
| A |
|
CHECK FOR DTCs (CRUISE CONTROL SYSTEM)
Clear the DTCs.
Perform the following to make sure that the DTC detection conditions are met.
Tech Tips
If the detection conditions are not met, the malfunction cannot be detected.
Drive the vehicle at a speed for which cruise control operation is possible.
Turn the cruise control system on using the cruise control main switch (ON/OFF button).
Push the cruise control main switch to -/SET to begin control of vehicle speed using the cruise control system.
Check the DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
USE SIMULATION METHOD TO CHECK Click here |
| B |
|
REPLACE ECM for 1GR-FE: Click here |