AIRBAG SYSTEM CHECK MODE PROCEDURE

  1. CHECK MODE (SIGNAL CHECK): DTC CHECK

    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / SRS Airbag / Utility / Signal Check, and proceed with checking using the GTS.

      Body Electrical > SRS Airbag > Utility

      Tester Display

      Signal Check
      Note:

      Select Signal Check screen on the GTS to clear the output DTCs (both current and history).

      Tip:

      • DTCs can be detected more sensitively in check mode than in normal diagnosis mode.

      • Perform check mode inspection when a malfunction in a squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.