ENGINE UNIT INSTALLATION

PROCEDURE

  1. INSTALL EXHAUST MANIFOLD (TWC: Catalyst)

    Click hereClick here

  2. INSTALL MANIFOLD STAY

    Click hereClick here

  3. INSTALL NO. 1 IGNITION COIL

    Click here

  4. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

    1. Apply a small amount of engine oil to a new O-ring.

    2. Install the O-ring to the engine oil level dipstick guide.

    3. Install the engine oil level dipstick guide with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

  5. INSTALL ENGINE OIL LEVEL DIPSTICK

    1. Install the engine oil level dipstick.

  6. INSTALL INJECTOR VIBRATION INSULATOR

    Click here

  7. INSTALL FUEL DELIVERY PIPE

    Click here

  8. INSTALL WATER BY-PASS HOSE ASSEMBLY

    1. Install the water by-pass hose assembly to the cylinder head sub-assembly and slide the 2 clips to secure it.