INJECTOR DRIVER (w/o EGR Cooler) INSTALLATION


  1. INSTALL INJECTOR DRIVER BRACKET


    1. Install the injector driver bracket with the 3 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  2. INSTALL INJECTOR DRIVER


    1. Install the injector driver with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 3 connectors.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.