METER / GAUGE SYSTEM OPERATION CHECK

  1. INSPECT INDICATOR/WARNING LIGHT

    1. Check the following indicators and warning lights.

      Indicator/Warning Light

      Switch Condition

      Specified Condition

      Headlight beam level control system indicator light*6*9

      Ignition switch off → ON

      Comes on for 3 seconds

      LED headlight indicator light*6*10

      Brake warning light

      Engine coolant temperature warning light*6

      Oil level indicator light*6*11

      Sedimenter warning light*6*11

      DPF warning light*6*11

      Stop and start indicator light*8

      Stop and start cancel indicator light*8

      Slip indicator light

      VSC OFF indicator light

      TRAC OFF indicator light*1*6

      ABS warning light

      Tire pressure warning light*2

      Eco driving indicator light

      Master caution warning light*5

      MAINT REQD indicator light*6

      AUTO LSD indicator light

      Downhill assist control indicator light*7

      Automatic High Beam indicator light*4

      AWD warning light*1*6

      Ignition switch off → ON

      Comes on for 4 seconds

      AWD lock indicator light*1

      SRS warning light

      Ignition switch off → ON

      Comes on for 6 seconds

      Charge warning light*6

      Ignition switch off → ON

      • Illuminates when ignition switch turned ON

      • Turns off when engine started

      Shift up indicator light*3*6

      Shift down indicator light*3*6

      Engine oil pressure warning light*6

      A/T OIL TEMP warning light*6

      EPS warning light

      MIL

      • *1: for 4WD/AWD

      • *2: w/ Tire Pressure Warning System

      • *3: for Manual Transaxle

      • *4: w/ Automatic High Beam System

      • *5: for TFT Display type

      • *6: for Segment Display type

      • *7: w/ Downhill Assist Control System

      • *8: w/ Stop and Start System

      • *9: w/ Automatic Headlight Beam Level Control System

      • *10: w/ LED Headlight

      • *11: Engine Type Diesel

  2. INSPECT SPEEDOMETER

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / ABS/VSC/TRC / Data List.

      Chassis > ABS/VSC/TRC > Data List

      Tester Display

      Vehicle Speed
      Table 1. for Australia

      Standard Indication

      Acceptable Range

      20 km/h

      20.3 to 24.3 km/h

      40 km/h

      40.6 to 45.1 km/h

      60 km/h

      60.9 to 65.4 km/h

      80 km/h

      81.2 to 86.2 km/h

      100 km/h

      101.5 to 105.5 km/h

      120 km/h

      121.8 to 126.8 km/h

      140 km/h

      142.1 to 147.1 km/h

      160 km/h

      162.4 to 167.4 km/h

      180 km/h

      182.7 to 187.7 km/h

      200 km/h

      203 to 208 km/h

      220 km/h

      223.3 to 228.3 km/h

      240 km/h*

      243.6 to 248.6 km/h

      260 km/h*

      263.9 to 268.9 km/h

      *: for TFT Type

      Table 2. except Australia (km/h)

      Standard Indication

      Acceptable Range

      20 km/h

      21 to 25 km/h

      40 km/h

      41.7 to 46.2 km/h

      60 km/h

      62.7 to 67.2 km/h

      80 km/h

      83.4 to 88.4 km/h

      100 km/h

      104.3 to 109.3 km/h

      120 km/h

      125.1 to 130.6 km/h

      140 km/h

      145.8 to 151.8 km/h

      160 km/h

      166.2 to 173.2 km/h

      180 km/h

      186.9 to 194.5 km/h

      200 km/h

      207.7 to 215.7 km/h

      220 km/h

      228.4 to 236.8 km/h

      240 km/h*

      245.2 to 250.2 km/h

      260 km/h*

      270 to 279.2 km/h

      *: for TFT Type

      Table 3. except Australia (MPH)

      Standard Indication

      Acceptable Range

      20 MPH

      21 to 23.5 MPH

      40 MPH

      42 to 44.5 MPH

      60 MPH

      62.5 to 66 MPH

      80 MPH

      83.1 to 87.1 MPH

      100 MPH

      103.9 to 108.4 MPH

      120 MPH

      124.7 to 129.6 MPH

      140 MPH

      145.4 to 150.7 MPH

      160 MPH

      166.2 to 161.9 MPH

      180 MPH

      187 to 193 MPH

      If the result is not as specified, the speedometer may have a malfunction.

      Note:

      Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.

    5. Check the deflection width of the speedometer indicator.

      Reference

      Within 0.3°

  3. INSPECT TACHOMETER

    1. Connect a tune-up tachometer and start the engine.

    2. Compare the test results with the tachometer indicator.

      Table 4. DC 13.5 V at 25°C (77°F)

      Standard Indication (rpm)

      Acceptable Range

      Data in ( ) is for Reference

      700

      670 to 810

      1000

      (957 to 1157)

      2000

      (1964 to 2264)

      3000

      2971 to 3371

      4000

      (4028 to 4428)

      5000

      5085 to 5485

      6000

      (6091 to 6591)

      7000

      7098 to 7698

      8000

      (8155 to 8755)

      If the result is not as specified, the tachometer may have a malfunction.

  4. INSPECT METER/GAUGE

    1. Connect the GTS to the DLC3.

    2. Perform the Active Test (Click hereClick here).

      OK

      Each meter/gauge needle indication is normal.

  5. INSPECT WARNING/INDICATOR LIGHT

    1. Connect the GTS to the DLC3.

    2. Perform the Active Test (Click hereClick here).

      OK

      Each warning/indicator light can be turned on and off using the GTS.

  6. INSPECT MULTI-INFORMATION DISPLAY

    1. Connect the GTS to the DLC3.

    2. Perform the Active Test (Click hereClick here).

      OK

      All dots in the multi-information display can be turned on and off using the GTS.