PANORAMIC VIEW MONITOR SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure as for the RHD and LHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time maybe required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  4. REMOVE TELLTALE LIGHT ASSEMBLY (CLEARANCE SONAR MAIN SWITCH)

    1. B337767

      Detach the 2 clips and claw and remove the telltale light assembly (clearance sonar main switch).

    2. B337768

      Disconnect the connector.