SHIFT AND SELECT LEVER SHAFT DISASSEMBLY

PROCEDURE

  1. REMOVE INNER NO. 2 SHIFT LEVER

    1. Secure the shift and select lever shaft assembly in a vise between aluminum plates.

    2. C204826

      Using a 5 mm pin punch and hammer, tap out the slotted spring pin and remove the inner No. 2 shift lever from the shift and select lever shaft.

      Tip:

      Make a note of the orientation of the inner No. 2 shift lever so that it can be reinstalled in the same position.

  2. REMOVE FRONT INNER SHIFT LEVER

    1. C200227

      Using a 5 mm pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the front inner shift lever.

  3. REMOVE RELEASE HEAD

    1. C204827

      Using a 5 mm pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the release head.