POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS
PROCEDURE
CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM
Tip:The following items can be customized.
Note:When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Door Lock / Utility / Customize.
Select the setting by referring to the table below.
Table 1. Door Lock Display
Default
Content
Setting
Auto Lock/Shift*
OFF
Function that locks all the doors when the shift lever is moved from P to any position other than P while the engine is running and all the doors are closed.
ON/OFF
Auto Unlock/Shift*
OFF
Function that unlocks all the doors when the shift lever is moved to P from any position other than P while the ignition switch is ON.
ON/OFF
All Unlock/Open-Close
OFF
Function that unlocks the other doors when the driver side door is opened within 43 seconds after the ignition switch is turned off.
ON/OFF
*: except Manual Transaxle
Customizing with radio and display receiver assembly
Turn the ignition switch to ON.
Enter the following menus: Setup / Vehicle / Vehicle settings.
Select the setting by referring to the table below.
Display
Default
Content
Setting
Auto lock by speed
On
Function that locks all doors when the vehicle speed reaches a certain level.
On/Off
Auto lock by shift from P*
Off
Function that locks all the doors when the shift lever is moved from P to any position other than P while the engine is running and all the doors are closed.
On/Off
Auto unlock by shift to P*
Off
Function that unlocks all the doors when the shift lever is moved to P from any position other than P while the ignition switch is ON.
On/Off
*: except Manual Transaxle