SEAT BELT WARNING LIGHT(for Hatchback, Wagon) INSPECTION

PROCEDURE

  1. INSPECT CLOCK ASSEMBLY

    1. B401712C02

      *a

      Indicator A

      *b

      Indicator B

      *c

      Indicator C

      *d

      Component without harness connected

      (Clock Assembly)

      Apply battery voltage to the connector according to the table below.

      OK

      Battery Connection

      Result

      Battery positive (+) - Terminal 3

      Battery negative (-) - Terminal 13

      Indicator A comes on

      Battery positive (+) - Terminal 3

      Battery negative (-) - Terminal 14

      Indicator B comes on

      Battery positive (+) - Terminal 3

      Battery negative (-) - Terminal 15

      Indicator C comes on

      If the result is not as specified, replace the clock assembly.