HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. A005E1T

      Engage the claw.

    4. Install the headlight assembly with the bolt and 2 screws.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL DECK FLOOR BOX RH

    Click here

  5. INSTALL REAR DECK FLOOR BOX

    Click here

  6. INSTALL NO. 1 DECK BOARD

    Click here

  7. INSTALL NO. 2 DECK BOARD

    Click here

  8. INSTALL DECK BOARD ASSEMBLY

    Click here

  9. ADJUST HEADLIGHT AIMING

    Click here

  10. ADJUST FOG LIGHT AIMING (w/ Fog Light)

    Click here