ANTENNA DIVIDER INSTALLATION

PROCEDURE

1. INSTALL ANTENNA DIVIDER

   
   

   1. Connect the connector.

   2. Install the antenna divider with the nut.

      Torque:

      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

2. INSTALL CONSOLE PANEL SUB-ASSEMBLY

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT

   Click here

4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

7. INSTALL REMOTE TOUCH ASSEMBLY

   Click here