MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL TURBO PRESSURE SENSOR ASSEMBLY

   1. Using a T27 "TORX" socket wrench, install the turbo pressure sensor assembly to the intake manifold with the bolt.

      5.0 N*m

      51 kgf*cm

      44 in.*lbf

      Note:

      Avoid physical shock to the turbo pressure sensor assembly.

   2. Connect the turbo pressure sensor assembly connector.

2. INSTALL ENGINE OIL LEVEL DIPSTICK

   1. Install the engine oil level dipstick.

3. INSTALL NO. 1 ENGINE COVER

   Click hereClick here