RELAY ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT ST NO. 1 RELAY

    1. E209082

      Check the resistance.

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        3 - 5

        Battery voltage not applied to terminals 1 and 2

        10 kΩ or higher

        Battery voltage applied to terminals 1 and 2

        Below 1 Ω

        If the result is not as specified, replace the ST NO. 1 relay.