VANE PUMP (for 1GR-FE) REMOVAL

Note


  • When using a vise, do not overtighten it.

  • When installing, coat the parts indicated by the arrows with power steering fluid Click here.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE FAN & GENERATOR V BELT

    A01DWC4E01

    1. While releasing the belt tension by turning the belt tensioner counterclockwise, remove the V-ribbed belt from the belt tensioner.

  3. DRAIN POWER STEERING FLUID

  4. DISCONNECT OIL RESERVOIR TO PUMP HOSE

    A01E128E01

    1. Disengage the clip and disconnect the hose.

  5. DISCONNECT PRESSURE FEED TUBE ASSEMBLY

    A01DVEH

    1. Remove the union bolt, then disconnect the pressure feed tube.

    2. Remove the gasket from the pressure feed tube.

  6. REMOVE VANE PUMP ASSEMBLY

    A01E0WQE01

    1. Disconnect the oil pressure switch connector.

    2. Remove the bolt and wire harness clamp bracket.

    3. A01E2W1E01

      Remove the 2 bolts and vane pump.