FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK ASSEMBLY (DRIVER SIDE)

    A01E0RJE01

    1. Apply battery voltage to the door lock and check operation of the door lock motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 1

      		 Lock

      Battery negative (+) → Terminal 1

      Battery positive (-) → Terminal 4

      		 Unlock

      • If the result is not as specified, replace the door lock assembly.

    2. A01DY3XE02

      Measure the resistance of the door lock and unlock switch.

      Standard resistance
      LHD
      Tester Connection Door Lock Condition Specified Condition
      7 - 9 Lock Below 1 Ω
      7 - 9, 7 - 10 OFF 10 kΩor higher
      7 - 10 Unlock Below 1 Ω
      RHD
      Tester Connection Door Lock Condition Specified Condition
      6 - 8 Lock Below 1 Ω
      5 - 8, 6- 8 OFF 10 kΩor higher
      5 - 8 Unlock Below 1 Ω

      • If the result is not as specified, replace the door lock assembly.

    3. w/ Wireless door lock system, w/o Theft deterrent system:

      Measure the resistance of the detection switch.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      7 - 8 Lock 10 kΩ or higher
      7 - 8 Unlock Below 1 Ω

      • If the result is not as specified, replace the door lock assembly.

  2. INSPECT FRONT DOOR LOCK ASSEMBLY (PASSENGER SIDE)

    A01DWJUE01

    1. Apply battery voltage to the door lock and check operation of the door lock motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 1

      		 Lock

      Battery negative (+) → Terminal 1

      Battery positive (-) → Terminal 4

      		 Unlock

      • If the result is not as specified, replace the door lock assembly.