CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE

  1. INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY

    1. Remove the cruise control main switch.

      B215369E01

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 (ECC) - 3 (CCS)

      Neutral

      1 MΩ or higher

      1 (ECC) - 3 (CCS)

      +RES

      235 to 245 Ω

      1 (ECC) - 3 (CCS)

      -SET

      617 to 643 Ω

      1 (ECC) - 3 (CCS)

      CANCEL

      1509 to 1571 Ω

      1 (ECC) - 3 (CCS)

      Main Switch OFF

      1 MΩ or higher

      1 (ECC) - 3 (CCS)

      Main Switch ON

      Below 2.5 Ω
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (Cruise Control Main Switch)

      -

      -

      • If the result is not as specified, replace the cruise control main switch assembly.