FUEL LID OPENER MOTOR ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the luggage closer motor assembly removal/installation are shown below.

Replacement Part Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link

  • The luggage closer motor assembly connector is disconnected

  • When the luggage compartment door is opened using a mechanical key

 Initialize luggage closer motor assembly The power trunk lid does not operate

Click here

PROCEDURE


  1. REMOVE LUGGAGE CLOSER MOTOR ASSEMBLY

    Click here

  2. REMOVE PARKING BRAKE ECU ASSEMBLY

    Click here

  3. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY


    1. B006CCJ

      Disconnect the connector and detach the clamp.

    2. Detach the claw and remove the fuel lid lock with motor assembly.