REAR SEATBACK HEATER(for Fold Down Seat Type) INSPECTION

PROCEDURE


  1. INSPECT REAR SEATBACK HEATER ASSEMBLY LH


    1. B00870YC01
      *a

      Component without harness connected

      (Rear Seatback Heater Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Seat heater temperature 20 °C (68 °F) 2.41 to 2.89 Ω
      1 - 3 Seat heater temperature 20 °C (68 °F) 1.17 to 1.40 Ω

      If the result is not as specified, replace the rear seatback heater assembly LH.

  2. INSPECT REAR SEATBACK HEATER ASSEMBLY RH


    1. B00870YC02
      *a

      Component without harness connected

      (Rear Seatback Heater Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Seat heater temperature 20 °C (68 °F) 2.41 to 2.89 Ω
      1 - 3 Seat heater temperature 20 °C (68 °F) 1.17 to 1.40 Ω

      If the result is not as specified, replace the rear seatback heater assembly RH.