POWER SEAT SWITCH(for Front Passenger Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

  1. REMOVE FRONT SEAT ASSEMBLY

    1. Remove the front seat assembly (Click here).

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    B239552

    1. Using a moulding remover, detach the 2 claws and remove the knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    B239554

    1. Using a moulding remover, detach the 2 claws and remove the knob.

  4. REMOVE FRONT SEAT CUSHION SHIELD RH

    B248647

    1. Remove the screw of the front seat No. 1 inner cushion shield and detach the guide.

    2. Detach the clip of the front seat No. 1 inner cushion shield.

    3. Using a moulding remover, detach the 3 claws and guide.

    4. Move the cushion shield in the direction of the arrow to detach the clip and remove the front seat No. 1 inner cushion shield together with the cushion shield as a unit.

    5. B248648

      Disconnect the lifter motor connector.

    6. Detach the 3 claws and open the wire harness cover.

    7. Detach the 3 wire harness clamps and disconnect the seat wire connector.

  5. REMOVE FRONT POWER SEAT SWITCH RH

    B239559

    1. Remove the 3 screws.

    2. Disconnect the power seat switch connector and remove the switch.