DOOR CONTROL RECEIVER(w/ Tire Pressure Warning System) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL ELECTRICAL KEY AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY

   
   

   1. 

      Engage the 2 guide to temporarily install the electrical key and tire pressure monitoring system receiver assembly.

   2. Install the electrical key and tire pressure monitoring system receiver assembly with the bolt.

      Note

      Do not install the electrical key and tire pressure monitoring system receiver assembly if it has been damaged or impacted in any way.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

   3. Connect the connector.

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

   Click here

3. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (for Upper Side)

   Click here

4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

5. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (for Lower Side)

   Click here

6. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

   Click here

7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY

   Click here

8. INSTALL NO. 2 CUP HOLDER

   Click here

9. INSTALL FRONT DECK SIDE TRIM COVER LH

   Click here

10. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

11. INSTALL NO. 1 DECK TRIM COVER

    Click here

12. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

13. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

14. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

15. INSTALL BACK DOOR SCUFF PLATE

    Click here

16. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

17. INSTALL REAR DECK FLOOR BOX

    Click here

18. INSTALL NO. 1 DECK BOARD

    Click here

19. INSTALL NO. 2 DECK BOARD

    Click here

20. INSTALL DECK BOARD ASSEMBLY

    Click here

21. REGISTER TRANSMITTER ID

    Click here

22. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

23. PERFORM INITIALIZATION

    Click here