THROTTLE BODY INSPECTION

PROCEDURE


  1. INSPECT THROTTLE BODY ASSEMBLY


    1. A005EEGE01
      Text in Illustration
      *a

      Component without harness connected

      (Throttle Body Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      D4-1 (M-) - D4-2 (M+) 20°C (68°F) 0.3 to 100 Ω

      If the result is not as specified, replace the throttle body assembly.