TRANSMISSION WIRE INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION WIRE


    1. A01RCHVC01
      *1 O-ring

      Coat the O-ring with ATF.

    2. Coat the bolt with ATF.

    3. Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }
    4. Connect the transmission wire clamp.

    5. Connect the solenoid (SL) valve connector.

    6. Connect the solenoid (SLT) valve connector.

    7. Connect the solenoid (SLU) valve connector.

    8. Connect the solenoid (SL2) valve connector.

    9. Connect the solenoid (SL1) valve connector.

    10. Connect the solenoid (SL3) valve connector.

    11. Connect the solenoid (SL4) valve connector.

    12. Connect the ATF temperature sensor assembly connector.

    13. Connect the transmission revolution sensor connector.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

    Click here