CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL NO. 1 CRANK POSITION SENSOR

    1. A295698C01

      *1

      O-ring

      Apply a light coat of engine oil to the O-ring of the No. 1 crank position sensor.

      Note:

      If reusing the No. 1 crank position sensor, be sure to inspect the O-ring.

    2. Install the No. 1 crank position sensor with the bolt.

      8.8 N*m

      90 kgf*cm

      78 in.*lbf

      Note:

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

    3. Connect the connector to the No. 1 crank position sensor.

  2. INSPECT FOR ENGINE OIL LEAK

  3. INSTALL NO. 1 ENGINE COVER

    Click here