HEADLIGHT ASSEMBLY REPAIR

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

  • If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

  • Ensure that the headlight assembly is not damaged.

PROCEDURE


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER


    1. A005A8C

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A005AQE

      Install the upper headlight protector retainer with the 2 screws.

  2. INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER


    1. A005D5E

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A005C46

      Install the upper No. 2 headlight protector retainer with the 2 screws.

  3. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for Halogen Headlight)


    1. A005DM6

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A005EIZ

      Install the upper headlight protector retainer LH with the 2 screws.

  4. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for LED Headlight)


    1. A005ADQ

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A005B4M

      Install the upper headlight protector retainer LH with the 2 screws.

  5. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER (for Halogen Headlight)


    1. A005C6Z

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A005AV6

      Install the lower headlight protector retainer with the 2 screws.

  6. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER (for LED Headlight)


    1. A005DC4

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A005BGK

      Install the lower headlight protector retainer with the 2 screws.

  7. INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER (for Halogen Headlight)


    1. A005E7V

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A005EC8

      Install the lower No. 2 headlight protector retainer with the 2 screws.

  8. INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER (for LED Headlight)


    1. A005ELA

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A005EPH

      Install the lower No. 2 headlight protector retainer with the 2 screws.