INSTRUMENT PANEL SPEAKER INSPECTION

PROCEDURE

  1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

    1. for 17 Speakers:

      1. E180661C02

        *a

        Component without harness connected

        (Front No. 2 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        Always

        4.6 to 7.0 Ω

        If the result is not as specified, replace the front No. 2 speaker assembly.

    2. for 9 Speakers:

      1. E180661C02

        *a

        Component without harness connected

        (Front No. 2 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        Always

        4 Ω

        If the result is not as specified, replace the front No. 2 speaker assembly.

  2. INSPECT FRONT NO. 4 SPEAKER ASSEMBLY

    1. for 17 Speakers:

      1. E180661C02

        *a

        Component without harness connected

        (Front No. 4 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        Always

        4.6 to 7.0 Ω

        If the result is not as specified, replace the front No. 4 speaker assembly.

    2. for 9 Speakers:

      1. E180661C02

        *a

        Component without harness connected

        (Front No. 4 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        Always

        6 Ω

        If the result is not as specified, replace the front No. 4 speaker assembly.