DOOR CONTROL RECEIVER(for Wagon) REMOVAL

PROCEDURE

1. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click hereClick here

2. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

   Click hereClick here

3. REMOVE FRONT DECK FLOOR BOX (w/ Deck Board)

   Click hereClick here

4. REMOVE REAR FLOOR MAT ASSEMBLY

   Click hereClick here

5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

   Click hereClick here

6. REMOVE DECK FLOOR BOX LH

   w/o Woofer:

   Click hereClick here

7. REMOVE TONNEAU COVER ASSEMBLY

   Click hereClick here

8. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

   Click hereClick here

9. REMOVE REAR DECK TRIM COVER

   Click hereClick here

10. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

11. REMOVE REAR SEAT HEADREST ASSEMBLY

12. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

13. REMOVE REAR SEATBACK ASSEMBLY LH

    Click here

14. REMOVE REAR DOOR SCUFF PLATE LH

    Click hereClick here

15. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click hereClick here

16. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click hereClick here

17. REMOVE REAR SEAT SIDE GARNISH LH

    Click hereClick here

18. REMOVE NO. 2 DECK SIDE TRIM HOOK

    Click hereClick here

19. REMOVE RECLINING REMOTE CONTROL BEZEL LH

    Click hereClick here

20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click hereClick here

21. REMOVE DOOR CONTROL RECEIVER

    1. 

       Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the 2 guides to remove the door control receiver.