LIGHTING SYSTEM OPERATION CHECK

  1. INSPECT BATTERY SAVING CONTROL OPERATION

    Note:

    Perform this inspection with the customize parameters at the default settings.

    The lights controlled by the battery saving control are as follows:

    • Map Light Assembly

    • No. 1 Luggage Compartment Light Assembly*

      • *: w/ Luggage Compartment Light

    1. The operation and conditions of this control are described below.

      Operation

      Condition

      Battery saving

      When 20 minutes elapse after the ignition switch is turned from ON to ACC or off and the lights that operate remain on, the lights are turned off.

      Tip:

      Battery saving control is canceled when any of the following operations is performed before the lights are turned off by the battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

      • The ignition switch is turned to ON.

      • Any door is opened and closed.