VEHICLE STABILITY CONTROL SYSTEM DTC CHECK / CLEAR

DTC CHECK/CLEAR

1. Check for DTCs.

   1. Turn the ignition switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the ignition switch to ON.

   4. Turn the GTS on.

   5. Read the DTCs following the prompts on the GTS. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

      Chassis > ABS/VSC/TRC > Trouble Codes

   6. Check the details of the DTCs.

      Click here

2. Clear the DTCs.

   1. Turn the ignition switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the ignition switch to ON.

   4. Turn the GTS on.

   5. Operate the GTS to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

      Chassis > ABS/VSC/TRC > Clear DTCs

   6. Press the DTC clear button.

END OF DTC CHECK/CLEAR

1. Turn the ignition switch to ON.

2. Check that the ABS warning, tire pressure warning (w/ tire pressure warning system) and slip indicator lights go off within approximately 3 seconds of turning the ignition switch to ON.

   Tip:

   • During the tire pressure warning system initialization: The tire pressure warning light illuminates for 4 seconds.

   • After the tire pressure warning system initialization: The tire pressure warning light illuminates for 3 seconds.