OUTER REAR VIEW MIRROR GLASS REMOVAL

PROCEDURE


  1. REMOVE OUTER MIRROR


    1. A0059P9

      Push the outside part of the outer mirror assembly and tilt it as shown in the illustration.

    2. A005BQQE01
      Text in Illustration
      *1 Protective Tape

      Push the upper part of the mirror surface and tilt it.

    3. Apply protective tape as shown in the illustration.

    4. A005AL0

      Using a moulding remover, disengage the 2 claws at the lower part of the outer mirror as shown in the illustration.

      Note

      Do not pull the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

    5. A005C2C

      Disengage the 2 guides as shown in the illustration.

    6. Disconnect the 2 connectors and remove the outer mirror.