ELECTRICAL KEY OSCILLATOR(for Luggage Compartment) INSTALLATION

PROCEDURE

1. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. 

      Install in this Direction

      Engage the clamp to install the No. 3 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when installing the No. 3 indoor electrical key antenna assembly. If the No. 3 indoor electrical key antenna assembly is dropped, replace it with a new one.

   2. Connect the connector.

2. INSTALL FRONT DECK FLOOR BOX (w/ Spare Tire)

   Click here

3. INSTALL DECK FLOOR BOX LH (w/o Spare Tire)

   Click here

4. INSTALL DECK FLOOR BOX RH (w/o Spare Tire)

   Click here

5. INSTALL REAR NO. 4 FLOOR BOARD (except Full Size Spare Tire)

   Click here

6. INSTALL REAR NO. 4 FLOOR BOARD (for Full Size Spare Tire)

   Click here

7. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

8. INSTALL SPARE WHEEL COVER (for Compact Spare Tire)

   Click here

9. INSTALL REAR FLOOR CARPET (w/o Spare Tire)

   Click here

10. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

11. INSTALL DECK BOARD ASSEMBLY

    Click here

12. INSTALL TONNEAU COVER ASSEMBLY

    Click here