NAVIGATION SYSTEM Disc cannot be Inserted or is Ejected Right After Insertion

PROCEDURE

1. CHECK IF A PROPER DISC IS INSERTED

   1. Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK

      Normal disc.

      Tip:

      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to Owner's Manual.

   Result

   Proceed to
   OK
   NG

   NG

   CHANGE DISC

   OK

2. CHECK THAT DISC IS INSERTED PROPERLY

   1. Check if the disc is inserted upside down.

      OK

      The disc is properly inserted.

   Result

   Proceed to
   OK
   NG

   NG

   INSERT DISC PROPERLY

   OK

3. CLEAN DISC

   1. Disc cleaning

      1. 

         If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

         OK

         Malfunction disappears.

         Note:

         Do not use a conventional record cleaner or antistatic preservative.

   Result

   Proceed to
   OK
   NG

   OK

   END (DISC IS DIRTY)

   NG

4. REPLACE DISC WITH ANOTHER AND RECHECK

   1. Replace the disc with a known good one and check that the malfunction disappears.

      OK

      Malfunction disappears.

   Result

   Proceed to
   OK
   NG

   OK

   END (DISC IS DEFECTIVE)

   NG

   REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

   Click here